Datacom Fire Solutions

Ph: (02) 4368 6116
Mobile: 0414 456 022


FPAA Membership no: 20961

Fire Safety Installations for Buildings

We design, manufactures and install fire alarm systems which range from simple manual evacuation systems to large systems providing the facilities required for modern building fire safety.

 

Fire Detector Units

These come in a variety of models depending on the facility to be protected. Thermal detectors require either a rapid rate of rise in temperature or the ambient temperature passing a set level to set them off. Smoke detectors are operated by photo-optic mechanisms where there is likely to be visible particles given off or by ionisation where combustion can take place with no real visible smoke - such as with large quantities of paper. Detector units can be any of the following:

 

  • Heat
  • Rate of temperature rise
  • Smoke
  • Flame
  • Hazardous gases
  • Air sampling (V.E.S.D.A)

 

 

Sprinkler Systems
Fully automatic fire sprinkler systems are widely regarded as the most effective method of controlling a fire. These systems are engineered to comply with the relevant Australian and international standards, using the latest in fire protection technology.

Sprinkler systems automatically detect a fire, transmit an alarm and control or extinguish the fire. They are located in places where people cannot always be present and operate only as needed in the immediate vicinity of the fire.

They have important life safety connotations, and can prevent fires from reaching destructive proportions, which may mean the difference between a minor interruption and a prolonged or permanent shutdown.